Cooling Tower & Condenser Treatment.
Scale, corrosion, and microbiological control for cooling towers and condensers, with passivation and automated chemical feed.
Open Towers Concentrate Whatever Is in the Water
An open recirculating tower concentrates whatever is in the makeup water. Hardness scales the fill and the tubes, the warm wet environment grows bacteria and biofilm, and the metal corrodes. Left alone, a tower loses efficiency, fouls the condenser, and corrodes from the inside out.
We treat scale, corrosion, and biology together, with a program matched to your water and your cycles of concentration, plus automated feed so it holds between service visits.
“Time for condenser passivation. Does it matter? YES.”
A Complete Cooling Program
Scale, corrosion, and biology controlled together, with the feed and monitoring to keep it that way.
Scale & Corrosion Inhibitors
Inhibitor programs that keep mineral scale off the fill and tubes and protect the metal in the tower, condenser, and piping.
Microbiological Control
Biocide programs and biofilm management to control bacteria, slime, and the conditions that let bacteria and biofilm take hold.
New-System & Condenser Passivation
Passivate fresh metal at startup so new tubes and surfaces build a protective film instead of corroding from the first fill.
Conductivity & Bleed Control
Conductivity and bleed control with makeup management to hold cycles of concentration where they should be.
Automated Feed & Remote Monitoring
Automated chemical feed with Walchem controllers and remote monitoring so the program holds between visits.
SOLIDified Solid Chemistry
Run the tower on SOLIDified solid chemistry and drop the hazardous liquid drums, handling, and spill risk.
Routine Service & Testing
Regular service and water testing using AquaPhoenix test methods to catch drift before it becomes a problem.
The Cooling Products We Run
Matched to your water, your metallurgy, and your cycles of concentration.
-
Corrosion & Deposition Programs
Inhibitor and deposition-control programs matched to your tower's water, metallurgy, and operating conditions. We design for the system in front of us, not a generic dosing chart.
-
EPA-Registered Biocides, Oxidizing and Non-Oxidizing
We run both oxidizing and non-oxidizing biocides, all EPA-registered, and rotate them so bacteria and biofilm never settle into one chemistry. The program is matched to your tower's bioload and conditions.
-
Start-Up & Pre-Treatment
Start-up products for new towers: pre-treatment to clean the system, then passivation so fresh metal builds a protective film from the first fill.
-
Off-Line & On-Line System Cleanup
Cleanup for organic or inorganic fouling, run off-line or on-line. When a tower gets away from you, we pull the scale, mud, and biofilm back out and reset the program.
Treatment That Fits Your Plant
Cooling and process water treatment installed and serviced on site across Ohio facilities.
Cooling system service by Hoffman Water.
Losing tower efficiency to scale or biofilm?
We'll come to your facility, test the tower water, and show you what's happening in the system, at no charge.
Cooling Tower Treatment Questions
Get Your Cooling System Under Control
We'll test the water, walk the system, and give you a straight recommendation for scale, corrosion, and microbiological control.